The correct firmware must match your hardware revision . Using mismatched firmware will make the device unusable.
Newer firmware resolves known system freezes, calculation bugs, or power management glitches. satlink ws-6933 software update
Once the software indicates "Complete" or "Success," the meter will usually reboot automatically. You can verify the new software version in the System Setup Benefits of Updating Improved Accuracy: The correct firmware must match your hardware revision
A software update resets the device to factory defaults, meaning you will need to reconfigure your local LNB type (Universal, Unicable, or Single) to start tracking signals again. Once the software indicates "Complete" or "Success," the
The official Satlink upgrade tools are built exclusively for Windows environments (Windows 7, 10, or 11).
This indicates a "brick" caused by the wrong firmware. You may need to use an RS232 recovery method if the USB port is no longer responsive. Pro-Tip: Manual Satellite Entry