Harvey — Hv3 Water Softener Installation Manual

Push the flexible hoses firmly into the ports and secure them with the retaining clips.

While technically possible for a competent DIYer with plumbing experience, self-installation requires careful attention to water regulations. The unit must be installed with appropriate backflow protection, drain arrangements, and overflow systems. If you choose to self-install, ensure you have checked the water pressure requirements and have all necessary WRAS-approved components. harvey hv3 water softener installation manual

Run a 1/2-inch flexible drain line from the softener’s drain elbow to a waste pipe. Use an to prevent any back-siphoning of wastewater into the softener. Push the flexible hoses firmly into the ports

The HV3 was the first water softener designed to fit discreetly under a kitchen sink, with two cylinders that allow for continuous softening—meaning you never have to worry about hard water bypass during regeneration cycles. Its non-electric design makes it both environmentally friendly and cost-effective to operate. If you choose to self-install, ensure you have

Harvey HV3 Water Softener Installation Manual: A Step-by-Step Guide