Stihl Fs96 Manual ((better)) ›

Before operating the FS 96, it is mandatory to read and understand the "Safety Precautions and Working Techniques" section of the instruction manual. Because this is a high-speed clearing saw, safety is paramount.

Clean the entire unit thoroughly and store it in a dry, safe place away from children. stihl fs96 manual

Turn the LA screw counterclockwise until the attachment stops spinning completely. Troubleshooting Common Issues Possible Cause Corrective Action Engine will not start Fuel tank empty or bad fuel Drain tank, refill with fresh 50:1 mix Engine is flooded Move choke to RUN, lock throttle, pull cord repeatedly Spark plug fouled or bad Clean, regap, or replace spark plug Engine loses power Air filter is clogged Clean or replace the air filter element Spark arrestor screen blocked Remove muffler cover and clean screen with a wire brush Carburetor out of adjustment Reset carburetor to standard settings (1 turn out) Cutting head spins at idle Idle speed (LA) set too high Turn LA screw counterclockwise to lower idle RPM Clutch springs worn or broken Inspect clutch assembly and replace broken springs Before operating the FS 96, it is mandatory

If the engine dies at idle, turn the LA screw clockwise until the engine runs smoothly. If the cutting attachment rotates while idling, turn the LA screw counterclockwise until the attachment stops moving. Turn the LA screw counterclockwise until the attachment