Hpe Smart Array S100i Sr Gen10 Sw Raid Driver For Windows Server 2022 [exclusive] -

A: You must enter the UEFI System Utilities (F9) at boot and enable the controller. It is disabled by default. After enabling the controller, you must also create a RAID array before an operating system can use it.

| Issue | Solution | |-------|----------| | Driver not signed | Boot Windows with “Disable driver signature enforcement” (temporary) or ensure you downloaded from HPE (certified). | | S100i not detected in BIOS | Check server BIOS → SATA Controller → set to mode (not AHCI). | | Blue screen during install | Ensure you’re using Windows Server 2022 driver, not 2019/2016. | | HPE SSA (Smart Storage Admin) doesn’t see array | Install HPE SSA separately (for S100i, use the “SW RAID” version). | A: You must enter the UEFI System Utilities