Save a copy of the working driver installation files on a partition folder (e.g., C:\POS_Drivers\ ) so technicians can quickly re-install software without needing internet access.
Note: Consult the user manual for your exact firmware version, as switch assignments may vary slightly.
Run the installer. When prompted to select the interface type, check both and Serial (COM) Ports . Note: Many DS-800 models route the internal touchscreen via an internal COM port (usually COM4 or COM5). Let the installer scan the ports. digipos ds-800 driver
for the driver files: mkdir /digi
: Obtain the "USBXpress" or "DS-800 USB Driver" file for your version of Windows from FastSampling. Save a copy of the working driver installation
Follow these steps to complete a clean installation of the DS-800 touchscreen driver on a Windows platform. Step 1: Prepare the System
: While the printer is compatible with ESC/POS commands (similar to the Epson TM-T88III), using a "Generic/Text Only" driver will often disable advanced features like the auto-cutter. It is recommended to use the Vendor Thermal Driver Version 3.00 for the best results ESP Online . Configuration Steps When prompted to select the interface type, check
Most DS-800 cash drawer ports are mapped directly to the open-drawer command of the receipt printer. Ensure your receipt printer driver (e.g., Epson TM-T88) is installed correctly and configure its "Peripheral Device" settings to kick the drawer before or after printing. Supported Operating Systems