: Lay the heavy main base stabilizing bar flat on your rubber matting.
You can view exploded parts diagrams and purchase replacement parts, such as cables or pulleys, through specialized distributors like Fitness Repair Parts . pacific fitness del mar home gym assembly manual
Insert the assembly down the center opening of the weight stack. : Lay the heavy main base stabilizing bar
Slide the over the guide rods so it sits flush on top of the stack, engaging the selector stem. Step 3: Main Upright Mast and Top Beam Slide the over the guide rods so it
| Problem | Likely Cause | Fix | |--------|-------------|-----| | | Pulley misaligned or missing spacer washer | Add a 1/8" nylon spacer between pulley and bracket | | Weight stack clunks loudly | Guide rods are dry or not vertical | Lubricate with silicone spray; loosen base bolts, tap rods vertical, retighten | | Press arms don't return to start | Return spring missing or cable too tight | Locate torsion spring on pivot axle; loosen cable by 1 turn | | Selector pin falls out during use | Weight stack shift + worn pin detent | Replace pin (standard 3/8" home gym pin, available on Amazon) | | Lat bar doesn't reach the seat | Cable routing too short | Verify you didn't skip a pulley; Del Mar requires 112" upper cable |
